 | | Click image for closeup |
Goes With:
(Check a box to also add that item to cart)
| Headworn Condenser Microphone. Made by Crown. (EM.CRW-CM-311A)
Used by world-renowned artists such as Garth Brooks, Britney Spears and Janet Jackson, the Crown CM-311A Differoid microphone is the headworn microphone of choice for the live-performance industry. Featuring clear, crisp vocal performance in a lightweight package, this microphone signifies the quality and performance value of the Crown CM Series of microphones. Developed for and with major performing musicians reaching for clarity with increased gain before feedback. Crown’s differoid concept was perfect for the task. The CM311A increases gain before feedback by as much as 6-12dB. The Crown CM311A only transmits what is the differential of the front and back elements increasing rejection of unwanted background noise and discriminates against distant sound sources such as monitor loudspeakers and instruments. Solve your on-stage problems with a hands free CM311A. The CM311A terminates in a belt clip housing that can be phantom powered or battery powered. It has XLR out as well as a line out to feed a wireless transmitter. The CM311A/E is provided with stripped leads and a wiring diagram for popular wireless systems. CM312A has a standard cardioid element. Specifications: - Transducer type: Electret condenser
- Frequency response (typical): 50 Hz to 17,000 Hz
- Polar pattern: Cardioid
- Impedance: 75 ohms balanced
- Recommended load impedance: 1000 ohms or greater
- Open-circuit sensitivity, typical, close-talking: 4 mV/Pa (-48 dB re 1V/Pa)
- Power sensitivity, typical, close-talking: -42.5 dB re 1 mW/Pa
- Equivalent noise level (self noise): 26 dB SPL typical, A-weighted
- S/N ratio: 68 dB at 94 dB SPL
- Maximum SPL: 148 dB SPL produces 3% THD
- Operating voltage: 9V DC internal alkaline battery or 18-48V phantom power
- Polarity: Positive pressure on diaphragm produces positive voltage on XLR pin 2 with respect to pin 3
- Current drain: 6.5 mA nominal
- Battery life: 85 hours
- Off-attenuation: 70 dB
- Output connectors: 3-pin pro audio (XLR type)
- Cables: 2-conductor shielded, unbalanced cable, 42" (106.68 cm) from headband to battery pack. Use 2-conductor shielded mic cable (not included) between XLR connector and mixer mic input
- Materials: High-impact plastic mic housing, brass boom, steel wire headband, high-impact plastic and steel battery pack
- Finish: Satin black
Customers who bought this item also bought:
• Factory Metal Vertical China Cymbal - 44-inch
• Adam Trombone Stand
• SIT Buddy Emmons Signature Pedal Steel Guitar Strings - Model BE-E9TH - 3 Sets
• Hot Line 20-foot Mic Cable - XLR to 1/4-inch
Browse Similar Items in:
Stage Headset Condenser Mics
Studio Headset Condenser Mics
|
